a1197

a1198

Item # 50680

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Close

Price Summary

Maximum Retail Price
(incl. of all taxes) $572.25
Selling Price $572.25
Total $572.25

In Stock

Highlights:

Counter is used for selecting the number of desired operations on a production run. The number of operations is set on the lower scale by holding down a white button and setting the count to be reached. The upper scale is a 5 digit totalizer. When the count reaches the lower scale setting, a built-in 3 way valve is switched to provide a pneumatic output to stop machine or signal that the count has been reached. Valve remains switched until counter is reset.

The counter operates with an impulse pressure between 30-115 PSI and can be reset either manually via a reset button or by a pneumatic signal to a specially provided port.

Add to wishlist

Category: Panel Mounted Pneumatic Predetermining Counter

Specifications

Specifications

Operating Pressure Range	30 to 115 psi
Connections	10-32 (M5) ports
Display	Black with white digits (5 numbers)
Reset	Manual button on cover or pneumatic signal of 180 ms duration.
Media	Filtered Air
Control Connections	Port Z – Counter pulse input Port Y – Reset Port P – Supply air to 3 way valve Port A – Output signal from valve
Duty Cycle	Continuous Min. pulse duration 8 ms Min. pause 10 ms
Operating Ambient	0 to +60 ºC 32 to 140 ºF
Weight	4 oz.
Materials	Molded Body
Face Plate Width	2 3/8 in.
Face Plate Height	3 in.
Behind Panel Depth	2 1/2 in.
Behind Panel Height	2 in.
Behind Panel Width	2 in.
Panel Cut Out	2 in. W x 11/16 in. H

Additional information

Weight	0.62 lbs

0 ★

0 Ratings

5 ★

0

4 ★

0

3 ★

0

2 ★

0

1 ★

0

There are no reviews yet.

Be the first to review “Item # 50680” Cancel reply

You must be logged in to post a review.

Recently Viewed

Add to wishlist

Panel or Subplate Mounted Pneumatic Timer (Up to 3 Minutes)

Item # PMT1G1B3

Highlights:

The Type PMT timer is an adjustable precise time delay control device. The timer is available with an on delay (NC) logic output.

Timing operation is dependent upon the input of a separate control signal which starts the timing sequence by setting a vacuum within the timer. Using atmospheric pressure (independent of line pressure), the timer begins the preset timing cycle. At the end of the cycle an internal 3 way valve is switched providing an output. The timer resets automatically after removal of the control signal.

The PMT has a separate subplate enabling the unit to be supplied with 10-32 or 1/8 NPT porting. The timer can be panel mounted with a bezel, or in the rear on a sub plate.

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Out Of Stock

Add to wishlist

D53 LOR N 24VDC 100%ED

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

BI13F 24VDC 25%ED

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

Panel or Surface Mounted Pneumatic Timer (Up to 60 Minutes)

Item # PT31EY1

Highlights:

The PT timer is an adjustable precise time delay pneumatic device. The timer is available with an on delay (NC), or an off delay (NO) output. The timer has 1/8 inch NPT ports.

The PT series timer combines a pneumatic timing mechanism with a floating spool valve assembly to provide a wide range of adjustable time control for fluid power systems. The timing assembly, which operates independently of the control pressure, is available in nine different ranges from one tenth of a second to 60 minutes, adjustable by means of a time-calibrated dial. Timing action is initiated by a motor diaphragm operated by a control pressure of from 5 to 140 PSIG.

The timer is equipped with a multi purpose 3 way output valve allowing it to be used as normally open, normally closed or as a diverter.

The PT is designed for panel or surface mounting. Panel mounted versions include a 3 13/16 inch square bezel while surface mounted units are equipped with a bracket for vertical mounting. If required, The PT can be specially calibrated for mounting horizontally.

On Delay Timer Operation Pilot pressure is applied to the control port to start timing. After the timer reaches its set time, the valve switches over. Removal of the pilot signal at any time resets the timer.

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

Panel or Surface Mounted Pneumatic Timer (Up to 60 Minutes)

Item # PT31FY1

Highlights:

The PT timer is an adjustable precise time delay pneumatic device. The timer is available with an on delay (NC), or an off delay (NO) output. The timer has 1/8 inch NPT ports.

The PT series timer combines a pneumatic timing mechanism with a floating spool valve assembly to provide a wide range of adjustable time control for fluid power systems. The timing assembly, which operates independently of the control pressure, is available in nine different ranges from one tenth of a second to 60 minutes, adjustable by means of a time-calibrated dial. Timing action is initiated by a motor diaphragm operated by a control pressure of from 5 to 140 PSIG.

The timer is equipped with a multi purpose 3 way output valve allowing it to be used as normally open, normally closed or as a diverter.

The PT is designed for panel or surface mounting. Panel mounted versions include a 3 13/16 inch square bezel while surface mounted units are equipped with a bracket for vertical mounting. If required, The PT can be specially calibrated for mounting horizontally.

On Delay Timer Operation Pilot pressure is applied to the control port to start timing. After the timer reaches its set time, the valve switches over. Removal of the pilot signal at any time resets the timer.

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

Pneumatic Cylinders

Item # 1405611

Highlights:

Splash-Proof Cover w/Knob for 5102

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

Rear Mounted - Set-it, Forget-it Timer (Up to 3 minutes)

Item # 51012-01

Highlights:

The Series 51 timer is an adjustable precise time delay control device. The timer is available with either an on delay- (NC) or off delay- (NO) 3 way built-in valve. It is designed for mounting along with valves or other logic devices and is available with 10-32 (M5) bottom ports, or 1/8″ NPT side ports. Bottom ported timers can also be panel mounted using (2) threaded M3 inserts on the top cover.

Timing operation can be set up in 2 ways; either via direct connection of the pressure line to be timed (1/8″ NPT ported only) or via a separate pilot signal. When pressure is applied to the input (or pilot port) the timing sequence begins by setting a vacuum within the timer. Using atmospheric pressure (independent of line pressure), the timer begins the preset timing cycle. At the end of the cycle an internal 3 way valve is switched providing an output. The timer resets automatically after removal of the control signal.

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

AL Series Visual Pressure Indicator, Panel Mounted

Item # AL15-BKY

Highlights:

AL indicators provide a 2 color visual indication of the presence or absence of air pressure in a system. The indicators are available in a variety of color choices. The AL series are fixed 2 color units that change color when air pressure is applied.

Units are designed for oil tight panel mounting. The rounded lens configuration provides for a 180° view of position.

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

Optical Shutters

D23 Shutter

Highlights:

Based on our rotary solenoids D2, Kendrion offers a wide range of highly reliable optical shutters that are designed to block light and laser beams for safety purpose.

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

Panel or Surface Mounted Pneumatic Timer (Up to 60 Minutes)

Item # PT31E

Highlights:

The PT timer is an adjustable precise time delay pneumatic device. The timer is available with an on delay (NC), or an off delay (NO) output. The timer has 1/8 inch NPT ports.

The PT series timer combines a pneumatic timing mechanism with a floating spool valve assembly to provide a wide range of adjustable time control for fluid power systems. The timing assembly, which operates independently of the control pressure, is available in nine different ranges from one tenth of a second to 60 minutes, adjustable by means of a time-calibrated dial. Timing action is initiated by a motor diaphragm operated by a control pressure of from 5 to 140 PSIG.

The timer is equipped with a multi purpose 3 way output valve allowing it to be used as normally open, normally closed or as a diverter.

The PT is designed for panel or surface mounting. Panel mounted versions include a 3 13/16 inch square bezel while surface mounted units are equipped with a bracket for vertical mounting. If required, The PT can be specially calibrated for mounting horizontally.

On Delay Timer Operation Pilot pressure is applied to the control port to start timing. After the timer reaches its set time, the valve switches over. Removal of the pilot signal at any time resets the timer.

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

Pneumatic Cylinders

Item # 13155

Highlights:

Repair Kit KR-8 Rot. Actuator

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

Place holder

Test

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Add to wishlist

Panel or Surface Mounted Pneumatic Timer (Up to 60 Minutes)

PT45H

Highlights:

The PT timer is an adjustable precise time delay pneumatic device. The timer is available with an on delay (NC), or an off delay (NO) output. The timer has 1/8 inch NPT ports.

The PT series timer combines a pneumatic timing mechanism with a floating spool valve assembly to provide a wide range of adjustable time control for fluid power systems. The timing assembly, which operates independently of the control pressure, is available in nine different ranges from one tenth of a second to 60 minutes, adjustable by means of a time-calibrated dial. Timing action is initiated by a motor diaphragm operated by a control pressure of from 5 to 140 PSIG.

The timer is equipped with a multi purpose 3 way output valve allowing it to be used as normally open, normally closed or as a diverter.

The PT is designed for panel or surface mounting. Panel mounted versions include a 3 13/16 inch square bezel while surface mounted units are equipped with a bracket for vertical mounting. If required, The PT can be specially calibrated for mounting horizontally.

Off Delay Timer Operation Applying pilot pressure of at least 100ms in duration to the control port shifts the valve. When the pilot pressure is removed, the timing sequence begins. After the timer reaches its set time, the valve switches off. Re-applying the pilot pressure resets the timer and valve.

Contact Us for Pricing and Orders Due to continuing supply chain issues and frequent price changes, please contact us directly at: Phone: 800-221-0714 or 732-291-3334 Dial extensions: 307 or 334 for pricing and delivery times and for placing orders.

Add to wishlist

Scroll To Top

My Cart

Shopping cart is empty!

Continue Shopping