| Weight | 0.06 lbs |
|---|
Item # 1074
Previous product 
CDR030 Shutter Call for Price
Next product
Item # 13155 Call for Price
Call for Price
Close
Price Summary
- $47.15
- $47.15
- $47.15
In Stock
Highlights:
Compare Mounting Nut 15NF Ind.
Category: Pneumatic Cylinders
Additional information
Related Products
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Recently Viewed
Item # 76083-90-42
Highlights:
Valve can be used to oscillate a double acting cylinder. Applications include mixing, stirring or sawing devices where time critical cycling is not required. A pneumatic control signal applied to the control port starts valve oscillating. Speed is dependent on connected volume and line pressure, and can be controlled by the addition of flow control valves on the cylinder input ports. Typical speed is 16 cycles per minute at 90 PSI.
Operating pressure range 35 to 145 PSI. Actuation force (pilot pressure): 35 PSI minimum.
Pilot port size is 1/8. Mounting via 4 through body holes 3/16″ Dia.
Oscillator valve will not operate if applied on vented applications such as an air motor. Working ports must have a connected defined volume.
For valve specifications see appendix. For detail dimensions contact factory.
Call for Price
Item # 76023-95-00
Highlights:
Solenoid operated, air piloted spool valves are available in single, double, priority and external air pilot versions. Valve designs use a stainless steel spool moving within a sleeve to direct airflow to the ports of the valve. Spool valves are known for their long life capability.
Valves are available in 1/8 and 1/4 port sizes and have an operating range of 35 to 145 PSI.
Valves include a red manual override and encapsulated coils and can be individually mounted or assembled on manifolds.
Operating pressure range is 35 to 145 PSI.
Through body mounting holes are 3/16″.
For valve specifications see appendix. See accessory section for electrical connectors. For detail dimensions contact factory.
Call for Price
Item # 50040
Highlights:
Brass metric sized fittings provide a full family of connectors for most applications in miniature pneumatics. Machined from solid brass stock, fittings are dependable, easy to install and reduce space requirements.
Series 50 fittings also include quick connect couplings and brass manifolds.
Call for Price
Item # 75023-71-47
Highlights:
Spool valves rely on a stainless steel spool moving within a sleeve to direct flow to the ports of the valve. Spool designs are known for their long life capability. Available in single, double or with priority port actuators. The priority port design overrides the signal from the opposite pilot operator to insure return to home position. Pneumatically actuated spool valves are available in 1/8 and 1/4 port sizes and require a minimum of 35 PSI operating pressure. Valves can be mounted individually using through body holes or assembled on manifolds.
Pilot port size (for actuation): 1/8 for all size valves.
Operating pressure range 35 to 145 PSI. Actuation force (pilot pressure): 35 PSI minimum.
Mounting via 4 through body holes 3/16″ Dia.
For valve specifications see appendix. See accessory section for manifolds if required. For detail dimensions contact factory.
Call for Price
Call for Price
Call for Price
Call for Price
Item # 47251-40
Highlights:
Mounts directly in port of valve or cylinder. Various fixed orifices reduce flow to a low and constant value. Check valve prevents flow in reverse direction. Available with 0.10/0.16/0.25/0.40/0.60 mm orifices. Add aperture size to catalog number.
Call for Price
Call for Price
Item # 51012-01
Highlights:
The Series 51 timer is an adjustable precise time delay control device. The timer is available with either an on delay- (NC) or off delay- (NO) 3 way built-in valve. It is designed for mounting along with valves or other logic devices and is available with 10-32 (M5) bottom ports, or 1/8″ NPT side ports. Bottom ported timers can also be panel mounted using (2) threaded M3 inserts on the top cover.
Timing operation can be set up in 2 ways; either via direct connection of the pressure line to be timed (1/8″ NPT ported only) or via a separate pilot signal. When pressure is applied to the input (or pilot port) the timing sequence begins by setting a vacuum within the timer. Using atmospheric pressure (independent of line pressure), the timer begins the preset timing cycle. At the end of the cycle an internal 3 way valve is switched providing an output. The timer resets automatically after removal of the control signal.
Call for Price
