| Weight | 0.37 lbs |
|---|
Item # 19005-06
Previous product 
Item # 19005-05 Call for Price
Next product
Item # 19005-07 Call for Price
Call for Price
Close
Price Summary
- $78.21
- $78.21
- $78.21
In Stock
Highlights:
Compare Mounting Bracket 100mm
Category: Pneumatic Cylinders
Additional information
Related Products
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Recently Viewed
Item # PT31HY1
Highlights:
The PT timer is an adjustable precise time delay pneumatic device. The timer is available with an on delay (NC), or an off delay (NO) output. The timer has 1/8 inch NPT ports.
The PT series timer combines a pneumatic timing mechanism with a floating spool valve assembly to provide a wide range of adjustable time control for fluid power systems. The timing assembly, which operates independently of the control pressure, is available in nine different ranges from one tenth of a second to 60 minutes, adjustable by means of a time-calibrated dial. Timing action is initiated by a motor diaphragm operated by a control pressure of from 5 to 140 PSIG.
The timer is equipped with a multi purpose 3 way output valve allowing it to be used as normally open, normally closed or as a diverter.
The PT is designed for panel or surface mounting. Panel mounted versions include a 3 13/16 inch square bezel while surface mounted units are equipped with a bracket for vertical mounting. If required, The PT can be specially calibrated for mounting horizontally.
On Delay Timer Operation Pilot pressure is applied to the control port to start timing. After the timer reaches its set time, the valve switches over. Removal of the pilot signal at any time resets the timer.
Call for Price
Item # PMT1H2B3
Highlights:
The Type PMT timer is an adjustable precise time delay control device. The timer is available with an on delay (NC) logic output.
Timing operation is dependent upon the input of a separate control signal which starts the timing sequence by setting a vacuum within the timer. Using atmospheric pressure (independent of line pressure), the timer begins the preset timing cycle. At the end of the cycle an internal 3 way valve is switched providing an output. The timer resets automatically after removal of the control signal.
The PMT has a separate subplate enabling the unit to be supplied with 10-32 or 1/8 NPT porting. The timer can be panel mounted with a bezel, or in the rear on a sub plate.
Call for Price
Item # 50680
Highlights:
Counter is used for selecting the number of desired operations on a production run. The number of operations is set on the lower scale by holding down a white button and setting the count to be reached. The upper scale is a 5 digit totalizer. When the count reaches the lower scale setting, a built-in 3 way valve is switched to provide a pneumatic output to stop machine or signal that the count has been reached. Valve remains switched until counter is reset.
The counter operates with an impulse pressure between 30-115 PSI and can be reset either manually via a reset button or by a pneumatic signal to a specially provided port.
Call for Price
Item # 50780-00US
Highlights:
The miniature Series 50 regulator provides regulation of air pressures from 0 to 115 PSI. The regulator is available in both relieving and non-relieving versions. Housing is nickel-plated brass.
The regulator is supplied with a panel nut for mounting in a 1 inch diameter hole. A large brass knob provides for adjustment throughout the regulator’s range. A setting lock nut is included to prevent tampering after adjustment. The regulator has a third port for connection of a pressure gauge. Primary and secondary ports are 180? apart on the side of the regulator body.
Several adjustment ranges are available for close regulation in most applications. Special designs are available.
Call for Price
Item # 52105
Highlights:
Instant Push-In Fittings for 4mm (5/32″) O.D. Tubing
Instant push-in fittings provide a fast means of connecting pneumatic systems. Air connections are made by pushing tubing into fitting. Removal of tubing is done by pressing in on the brass collar, releasing tube. Series 52 fittings are designed for 5/32 inch (4mm) tubing and are constructed with a brass base and an anodized aluminum collar. Series 56 push-in fittings are constructed the same except have molded collars, and accept 1/8 inch (6mm) tubing.
Call for Price
AL19-GA
Highlights:
AL indicators provide a 2 color visual indication of the presence or absence of air pressure in a system. The indicators are available in a variety of color choices. The AL series are fixed 2 color units that change color when air pressure is applied.
Units are designed for oil tight panel mounting. The rounded lens configuration provides for a 180° view of position.
Call for Price
Call for Price
Call for Price