Weight | 0.37 lbs |
---|
- Sorry, this product cannot be purchased.
Item # 19094-050
Price Summary
- $135.03
- $135.03
- $135.03
Com Cyl. W/Mag. D/A Male Thrd
Related Products
Recently Viewed
Item # 54024
The 54 Series timer is a totally pneumatic device with ? 1% repeatability. Timing is fully adjustable throughout the timing range by a knob on the front dial face. The standard timer is equipped with a special 4 way valve which provides for on or off delay timing (depending on plumbing connections). The front dial displays set time and the time remaining in the cycle.
The operation of the timer depends on the input of a separate control signal. The control signal drives a regulated air motor and gear chain to provide accurate timing regardless of control air pressure fluctuation. The timer resets automatically (approx. 200 ms) after removal of control pressure signal.
A special version of the timer includes a rotor stop option which allows for an external valve to be added to permit a “count down on hold” function.
The 54 Series timer is self-contained in a panel mounted lexan case with a front timing adjustment knob. Connections are made at the rear of the timer. Spring clips are used to panel mount the unit.
Item # 76023-51-41
Standard raised red pushbutton for momentary actuation
Operating pressure range std type – 0-145 PSI. air piloted types minimum 35 PSI. Actuation force: std. – 7.9 lbs., air pilot assisted types 18 lbs. Above panel dimensions 1.125″ dia. x 0.75″ H. Typical behind panel dimensions ate 4.75″ (3 way). 5.5″ (4 way) D. x 1.375″ H x 0.75′ W.
For valve specifications see appendix. For detail dimensions contact factory.
Item # 76420-02-04
Two sizes of manifold kits are available (1/8 and 1/4 ported) for standard directional control valves, pneumatically or electrically operated (4 way, In-Line type, 2 or 3 position, except valve types 76123, 76124, 76127). Manifolds are single piece aluminum bases with common supply and exhaust ports on each end (1/8 or 1/4 metric respectively). For NPT supply ports, order supply line adaptor kit separately. Manifold kits include all valve mounting hardware, which accommodates both NPT, or Metric ported versions of valves. A hollow bolt is used to connect the valve to the base and supply the line air pressure. Two brass sleeves, sealed with O-rings, connect the exhaust ports. If a valve station is unoccupied (for future use), a blanking bar kit must be used to block manifold ports. Manifolds can be fastened down by 4 threaded M5 holes. Two or more 1/8 ported manifolds can be linked together with the use of connecting nipples and threaded tie rods (up to 3/16″ dia.) using the through body holes on the sides of the manifold to increase the number of stations.
Item # 76022-47-21
Selector switch maintains valve position.
Operating pressure range std. type- 0-145 PSI: air piloted types minimum 35 PSI. Actuation force: std – 7.9 lbs., air pilot assisted types 7.8 lbs.
Above panel dimensions are 1.125″ dia. x 1″ H. Behind panel dimensions are 4″ (3 way), 4.5″ (4 way) D. x 1.375″ H. x .75 W.
For valve specifications see appendix. For detail dimensions contact factory.