| Weight | 0.5 lbs |
|---|
Item # 211R-01
Previous product 
Item # 20696-01 Call for Price
Next product
Item # 211R-07 Call for Price
Call for Price
Close
Price Summary
- $93.39
- $93.39
- $93.39
In Stock
Highlights:
Compare Series 21 Cmplt Rebuild Kit 32mm
Category: Pneumatic Cylinders
Additional information
Related Products
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Call for Price
Recently Viewed
Item # 76123-71-41
Highlights:
Spool valves rely on a stainless steel spool moving within a sleeve to direct flow to the ports of the valve. Spool designs are known for their long life capability. Available in single, double or with priority port actuators. The priority port design overrides the signal from the opposite pilot operator to insure return to home position. Pneumatically actuated spool valves are available in 1/8 and 1/4 port sizes and require a minimum of 35 PSI operating pressure. Valves can be mounted individually using through body holes or assembled on manifolds.
Pilot port size (for actuation): 1/8 for all size valves.
Operating pressure range 35 to 145 PSI. Actuation force (pilot pressure): 35 PSI minimum.
Mounting via 4 through body holes 3/16″ Dia.
For valve specifications see appendix. See accessory section for manifolds if required. For detail dimensions contact factory.
Call for Price
Item # 48255-50US
Highlights:
The Series 48 miniature regulator has characteristics similar to the Series 50 miniature regulator. The unit, however, is specially designed for systems where constant adjustment of pressure is not necessary.
The Series 48 regulator is designed for mounting in panel interiors. Two (10-32) tapped holes are provided in the side of the housing for attachment to panel or mounting brackets. Ports (2) are 180? apart on the sides of the unit housing.
A variety of regulation ranges is available to suit most applications. Special designs are available.
Call for Price
Item # 76042-27-00
Highlights:
Knob valves have a small travel of about 1/4 inch and can be easily operated with the palm of a hand. Knobs are constructed of sturdy black molded material. Available in spring return, pneumatic return and push-pull versions.
Operating pressure range is 0-145 PSI. Actuation force at 90 PSI: 1/8 port approx. 3.4 Lbs., 1/4 port 11.3 Lbs.
For normally open function on 3 way valves reverse connect ports 1-3. For 2 way operation, plug port 3. Panel mounting hole size for 1/8-ported valves is 5/8 inch diameter, for 1/4-ported valves, 7/8 inch. Above panel dimensions: 1/8-ported are 1″ Dia. x 1.5? H: 1/4-ported -1.5″ Dia. x 2.25″ H.
Typical behind panel dimensions of 4 way 1/8 ported valves are 2.5″ D x 1.375″ W x 0.75″ H; 1/4 ported valves- 4″ D x 2″ W x 1″ H. For 3 way valves subtract 0.75″ from depth. For pneumatic return add 1″ to depth dimension. Allow space for fittings and tubing.
For valve specifications see appendix. For detail dimensions contact factory.
Call for Price
Call for Price
Call for Price
Item # 76136-01-00
Highlights:
Fits all standard valves except ISO valves with CNOMO air pilots and coils.
The 3 way pilot valve section of standard solenoid-operated valves can also be used as a remote air pilot valve when mounted on a sub base or manifold shown below. The valve has an orifice of 1mm and a flow of approximately 2 CFM at 90 PSI. Operating pressure range is 0-145 PSI. The valve includes a red lever for manual operation. Also available in a normally open version, catalog number 76136-02-00.
Order coils separately
Call for Price
Call for Price
Call for Price
AL19-GA
Highlights:
AL indicators provide a 2 color visual indication of the presence or absence of air pressure in a system. The indicators are available in a variety of color choices. The AL series are fixed 2 color units that change color when air pressure is applied.
Units are designed for oil tight panel mounting. The rounded lens configuration provides for a 180° view of position.
Call for Price
Call for Price
Item # 50500
Highlights:
Brass metric sized fittings provide a full family of connectors for most applications in miniature pneumatics. Machined from solid brass stock, fittings are dependable, easy to install and reduce space requirements.
Series 50 fittings also include quick connect couplings and brass manifolds.
Call for Price
Call for Price
Item # 50029
Highlights:
Spare seals for fittings are available in packs of 100. Seal number 50029 is used as the top seal for banjo fittings.
Call for Price
Call for Price
Call for Price