Item Name | Replacement Sphere |
Color | Black – White |
Item # NF5 BKW
Price Summary
- $38.57
- $38.57
- $38.57
Replacement Parts: Item #: NF5-BKW Item Name: Replacement Sphere Color: Black – White
Weight | 0.19 lbs |
---|
Be the first to review “Item # NF5 BKW” Cancel reply
You must be logged in to post a review.
Related Products
Item # NF5-YBK
Replacement Parts: Item #: NF5-YBK Item Name: Replacement Sphere Color: Yellow – Black
Item # NF5-ABK
Replacement Parts: Item #: NF5-ABK Item Name: Replacement Sphere Color: Amber – Black
Item # NF5-RG
Replacement Parts: Item #: NF5-RG Item Name: Replacement Sphere Color: Red – Green
Item # NF5-GBK
Replacement Parts: Item #: NF5-GBK Item Name: Replacement Sphere Color: Green – Black
Item # NF5-RBK
Replacement Parts: Item #: NF5-RBK Item Name: Replacement Sphere Color: Red – Black
Item # NF5-GW
Replacement Parts: Item #: NF5-GW Item Name: Replacement Sphere Color: Green – White
Item # NF5-AG
Replacement Parts: Item #: NF5-AG Item Name: Replacement Sphere Color: Amber – Green
Recently Viewed
Item # 76440-02-07
Two sizes of manifold kits are available (1/8 and 1/4 ported) for standard directional control valves, pneumatically or electrically operated (4 way, In-Line type, 2 or 3 position, except valve types 76123, 76124, 76127). Manifolds are single piece aluminum bases with common supply and exhaust ports on each end (1/8 or 1/4 metric respectively). For NPT supply ports, order supply line adaptor kit separately. Manifold kits include all valve mounting hardware, which accommodates both NPT, or Metric ported versions of valves. A hollow bolt is used to connect the valve to the base and supply the line air pressure. Two brass sleeves, sealed with O-rings, connect the exhaust ports. If a valve station is unoccupied (for future use), a blanking bar kit must be used to block manifold ports. Manifolds can be fastened down by 4 threaded M5 holes. Two or more 1/8 ported manifolds can be linked together with the use of connecting nipples and threaded tie rods (up to 3/16″ dia.) using the through body holes on the sides of the manifold to increase the number of stations.
Item # 47251-40
Mounts directly in port of valve or cylinder. Various fixed orifices reduce flow to a low and constant value. Check valve prevents flow in reverse direction. Available with 0.10/0.16/0.25/0.40/0.60 mm orifices. Add aperture size to catalog number.
Item # PM14-00
These pneumatic totalizers can be used as an event, part or lot counter. The counter registers pneumatic impulses on 4, 6 or 8 digit displays. Standard units operate with impulse pressures between 25 and 100 psi. Low pressure models operate between 7.5 and 30 psi. A variety of options include panel mounting with screws or mounting clips and surface mount with base or rear stud. The counters are available with or without manual reset.
Item # 76323-92-00
Solenoid operated, air piloted spool valves are available in single, double, priority and external air pilot versions. Valve designs use a stainless steel spool moving within a sleeve to direct airflow to the ports of the valve. Spool valves are known for their long life capability.
Valves are available in 1/8 and 1/4 port sizes and have an operating range of 35 to 145 PSI.
Valves include a red manual override and encapsulated coils and can be individually mounted or assembled on manifolds.
Operating pressure range is 35 to 145 PSI. (Use valves with external pilot for switching lower pressures.)
Through body mounting holes are 3/16″.
For valve specifications see appendix. See accessory section for electrical connectors and manifolds. For detail dimensions contact factory.
Item # 75042-27-00
Knob valves have a small travel of about 1/4 inch and can be easily operated with the palm of a hand. Knobs are constructed of sturdy black molded material. Available in spring return, pneumatic return and push-pull versions.
Operating pressure range is 0-145 PSI. Actuation force at 90 PSI: 1/8 port approx. 3.4 Lbs., 1/4 port 11.3 Lbs.
For normally open function on 3 way valves reverse connect ports 1-3. For 2 way operation, plug port 3. Panel mounting hole size for 1/8-ported valves is 5/8 inch diameter, for 1/4-ported valves, 7/8 inch. Above panel dimensions: 1/8-ported are 1″ Dia. x 1.5? H: 1/4-ported -1.5″ Dia. x 2.25″ H.
Typical behind panel dimensions of 4 way 1/8 ported valves are 2.5″ D x 1.375″ W x 0.75″ H; 1/4 ported valves- 4″ D x 2″ W x 1″ H. For 3 way valves subtract 0.75″ from depth. For pneumatic return add 1″ to depth dimension. Allow space for fittings and tubing.
For valve specifications see appendix. For detail dimensions contact factory.
There are no reviews yet.