Weight | 0.37 lbs |
---|
Item # 19094-050
Price Summary
- $135.03
- $135.03
- $135.03
Com Cyl. W/Mag. D/A Male Thrd
Related Products
Recently Viewed
Item # 76023-25-40
Lever valves can be used to manually switch air supplies on equipment or operate cylinders and other devices. Valves can be panel mounted or fastened to a surface via body mounting holes. Handles have a contemporary black molded grip and require 3.4 lbs. of force to operate. Valves are available in spring return, pneumatic return and maintained position versions.
Operating pressure range is 0-145 PSI. Actuation force at 90 PSI, is approx. 3.4 Lbs.
For normally open function on 3 way valves, reverse connect ports 1-3. For 2 way operation, plug port 3.
Panel mounting hole size for 1/8-ported valves is 5/8 inch diameter, for 1/4 ported valves, 7/8 inch. Through body mounting holes are 3/16″ dia.
Typical dimensions of 4 way 1/8 ported valves are 3.75″ L x 1.375″ W x 0.75″ D. For 1/4 ported valves: 4.75″ L x 2″ W x 1″ D. For 3 way valves subtract 0.75″ from L dimension. For pneumatic return valves add 1″ to L dimension. Allow space for fittings and tubing.
For valve specifications see appendix. For detail dimensions contact factory.
Item # 76022-51-21
Standard raised red pushbutton for momentary actuation
Operating pressure range std type – 0-145 PSI. air piloted types minimum 35 PSI. Actuation force: std. – 7.9 lbs., air pilot assisted types 18 lbs. Above panel dimensions 1.125″ dia. x 0.75″ H. Typical behind panel dimensions ate 4.75″ (3 way). 5.5″ (4 way) D. x 1.375″ H x 0.75′ W.
For valve specifications see appendix. For detail dimensions contact factory.
Item # 76026-23-31
Used as a pneumatic limit switch or position detector. Roller arm travel is 9/16″ (14mm). Actuation force is 7.9 Lbs.
Operating pressure range 0-145 PSI. Actuation force at 90 PSI, is approx. 7.9 Lbs.
Valve body dimensions are 1.812″ L x 1.25″ H x 0.625″ W. Roller arm extends 1.33″ beyond body and travel is 0.562″.
Through body mounting holes 3/16″ diameter.
For valve specifications see appendix. For detail dimensions contact factory.
Item # LAPM14-01
These pneumatic totalizers can be used as an event, part or lot counter. The counter registers pneumatic impulses on 4, 6 or 8 digit displays. Standard units operate with impulse pressures between 25 and 100 psi. Low pressure models operate between 7.5 and 30 psi. A variety of options include panel mounting with screws or mounting clips and surface mount with base or rear stud. The counters are available with or without manual reset.
Item # 76420-02-09
Two sizes of manifold kits are available (1/8 and 1/4 ported) for standard directional control valves, pneumatically or electrically operated (4 way, In-Line type, 2 or 3 position, except valve types 76123, 76124, 76127). Manifolds are single piece aluminum bases with common supply and exhaust ports on each end (1/8 or 1/4 metric respectively). For NPT supply ports, order supply line adaptor kit separately. Manifold kits include all valve mounting hardware, which accommodates both NPT, or Metric ported versions of valves. A hollow bolt is used to connect the valve to the base and supply the line air pressure. Two brass sleeves, sealed with O-rings, connect the exhaust ports. If a valve station is unoccupied (for future use), a blanking bar kit must be used to block manifold ports. Manifolds can be fastened down by 4 threaded M5 holes. Two or more 1/8 ported manifolds can be linked together with the use of connecting nipples and threaded tie rods (up to 3/16″ dia.) using the through body holes on the sides of the manifold to increase the number of stations.
Item # 76026-69-21
Foot pedal valves can be used to operate devices which hold work pieces in place on bench workstations or perform punching or drilling operations on production pieces. Housing shields pedal preventing accidental operation. Enclosure is constructed of polycarbonate and available in high visibility yellow or blue colors.
Operating pressure range is 0 to 145 PSI. Actuation force at 90 PSI. is approx. 8 lbs.
Enclosure dimensions are 9″ L x 5 5/8″ W x 4 5/8″ H. Enclosure- polycarbonate, valve body die cast aluminum housing with Buna N seals.
Foot pedals with 2 mm orifice valves have an internal non-accessible exhaust port.