Weight | 0.19 lbs |
---|
Item # 39232-010
Price Summary
- $168.52
- $168.52
- $168.52
Sh. Str.Cyl Double Rod End D/A
Related Products
Recently Viewed
Item # 76025-23-21
Depressing plunger operates valve, used to detect material position or as an end of travel valve. Plunger travel approx. 3/16 inch (5mm). Actuation force is 13.5 Lbs.
Operating pressure range 0-145 PSI. Actuation force@ 90 PSI. is approx. 13.5 Lbs.
Valve body dimensions are 1.968″ L .625″ W 1.25″ H. Through body mounting holes 3/16″ Dia.
Flat Lever extends 1.0625″ from valve body. Travel 0.562″.
Plunger diameter is 9/32″ and extends 55″ from valve body. Plunger travel 1875″ ?0.4″
For valve specifications see appendix. For detail dimensions contact
tem # 76047-81-41
Pneumatically operated poppet valves are available in single, double or with priority port actuators. The priority port design overrides the signal from the opposite pilot operator to insure return to home position. Poppet valves rely on O rings and gaskets to seal passage ways within the valve and generally offer higher flow rates than other types of valves.
These valves are available in port sizes of 1/8, 1/4 and 1/2. Pilot ports are 1/8 for all size valves and require minimum of 35 PSI operating pressure. Single air pilot valves have an air supported spring return and require a pilot pressure equal to or greater than the air supply pressure at port 1. Valves can be mounted using through body holes or assembled on manifolds.
Pilot port size (for actuation): 1/8 for all size valves.
Operating pressure range 35 to 145 PSI. Actuation force (pilot pressure): 35 PSI minimum.
Mounting via 4 through body holes 3/16? Dia. (1/2? ported valves- 1/4? Dia.).
For valve specifications see appendix. See accessory section for manifolds if required. For detail dimensions contact factory.
Item # 76066-81-21
Three way pneumatically operated poppet valves provide high flow rates in a basic valve design. Available up to 1/2 ported sizes in normally closed and normally open versions. Pilot ports are 1/8 inch and require a minimum of 35 PSI to operate.
Operating pressure range is 0 to 145 PSI. Pilot port size is 1/8. Actuation pressure (pilot pressure) is 35 PSI minimum.
Through body mounting holes are 3/16″ for 1/8 and 1/4 ported valves, 1/4″ for 1/2 ported valves.
For valve specifications see appendix. For detail dimensions contact factory.