Tubing | 5 x 1 mm |
Thread | M5 thread |
Flow Full Open | 3.35 CFM at 100 psi 1.4 CFM at 45 psi |
Height | 13/16 in. |
Width | 1/4 in. |
Depth | 7/8 in. |
Item # 47070
Price Summary
- $21.89
- $21.89
- $21.89
For direct mounting on valve or cylinder ports, with captive adjusting screw and L-banjo type barb fitting.
Weight | 0.62 lbs |
---|
Be the first to review “Item # 47070” Cancel reply
You must be logged in to post a review.
Related Products
Item # 47086
For direct mounting on cylinder or valve ports, with L-banjo type instant push-in fitting and captive adjusting screw.
Item # 47080
For direct mounting on cylinder or valve ports, with L-banjo type instant push-in fitting and captive adjusting screw.
Item # 47071
For direct mounting on valve or cylinder ports, with captive adjusting screw and L-banjo type barb fitting.
Item # 47085
For direct mounting on valve or cylinder ports, with captive adjusting screw and L-banjo type barb fitting.
Item # 47090
For direct mounting on cylinder or valve ports, with L-banjo type instant push-in fitting and captive adjusting screw.
Item # 47200
For direct mounting on exhaust ports. Adjustable, equipped with locking nut to prevent tampering or loosening after setting is made.
Item # 47091
For direct mounting on cylinder or valve ports, with L-banjo type instant push-in fitting and captive adjusting screw.
Item # 47081
For direct mounting on valve or cylinder ports, with captive adjusting screw and L-banjo type barb fitting.
Recently Viewed
Item # 75023-25-40
Lever valves can be used to manually switch air supplies on equipment or operate cylinders and other devices. Valves can be panel mounted or fastened to a surface via body mounting holes. Handles have a contemporary black molded grip and require 3.4 lbs. of force to operate. Valves are available in spring return, pneumatic return and maintained position versions.
Operating pressure range is 0-145 PSI. Actuation force at 90 PSI, is approx. 3.4 Lbs.
For normally open function on 3 way valves, reverse connect ports 1-3. For 2 way operation, plug port 3.
Panel mounting hole size for 1/8-ported valves is 5/8 inch diameter, for 1/4 ported valves, 7/8 inch. Through body mounting holes are 3/16″ dia.
Typical dimensions of 4 way 1/8 ported valves are 3.75″ L x 1.375″ W x 0.75″ D. For 1/4 ported valves: 4.75″ L x 2″ W x 1″ D. For 3 way valves subtract 0.75″ from L dimension. For pneumatic return valves add 1″ to L dimension. Allow space for fittings and tubing.
For valve specifications see appendix. For detail dimensions contact factory.
Item # 76043-92-00
Solenoid operated, air piloted spool valves are available in single, double, priority and external air pilot versions. Valve designs use a stainless steel spool moving within a sleeve to direct airflow to the ports of the valve. Spool valves are known for their long life capability.
Valves are available in 1/8 and 1/4 port sizes and have an operating range of 35 to 145 PSI.
Valves include a red manual override and encapsulated coils and can be individually mounted or assembled on manifolds.
Operating pressure range is 35 to 145 PSI. (Use valves with external pilot for switching lower pressures.)
Through body mounting holes are 3/16″.
For valve specifications see appendix. See accessory section for electrical connectors and manifolds. For detail dimensions contact factory.
Item # LPM14-01
These pneumatic totalizers can be used as an event, part or lot counter. The counter registers pneumatic impulses on 4, 6 or 8 digit displays. Standard units operate with impulse pressures between 25 and 100 psi. Low pressure models operate between 7.5 and 30 psi. A variety of options include panel mounting with screws or mounting clips and surface mount with base or rear stud. The counters are available with or without manual reset.
Item # 75366-11-00
Valves are similar to the standard 3 way valves shown on the opposite page except have been modified with special seals and springs for vacuum applications. Valves have an external air supply port required to operate the pilot valve.
Through body holes are 3/16″ for 1/8 and 1/4 ported valves, 1/4 ” for 1/2 ported valves.
For valve specifications see appendix. See accessory section for electrical connectors. For detail dimensions contact factory.
Item # PM14-10
These pneumatic totalizers can be used as an event, part or lot counter. The counter registers pneumatic impulses on 4, 6 or 8 digit displays. Standard units operate with impulse pressures between 25 and 100 psi. Low pressure models operate between 7.5 and 30 psi. A variety of options include panel mounting with screws or mounting clips and surface mount with base or rear stud. The counters are available with or without manual reset.
There are no reviews yet.