Weight | 0.25 lbs |
---|
Item # 76136-60-00
Price Summary
- $105.00
- $105.00
- $105.00
Replacement Operators for Manual/Mechanical Valves: Item #: 76136-60-00 Description: Air piloted plunger actuator set
Be the first to review “Item # 76136-60-00” Cancel reply
You must be logged in to post a review.
Related Products
Item # 76136-67-00
Replacement Operators for Manual/Mechanical Valves: Item #: 76136-67-00 Description: Air piloted Mushroom head pushbutton actuator set
Item # 76136-63-00
Replacement Operators for Manual/Mechanical Valves: Item #: 76136-63-00 Description: Air piloted antenna actuator set
Item # 76136-64-00
Replacement Operators for Manual/Mechanical Valves: Item #: 76136-64-00 Description: Air piloted shrouded head pushbutton actuator set
Recently Viewed
Item # 76124-02-00
Three position valves can be used to position cylinder piston rods or switch air supplies to alternate devices. In line spool valves are available in 2 versions; with all ports open or all ports closed in the center (off) position. Springs return the valve to the center position when the coil power is switched off. Valves can be individually mounted using through body holes or assembled on manifolds.
Operating pressure range is 35 to 145 PSI. (Use valves with external pilot for switching lower pressures).
Through body mounting holes are 3/16″.
For valve specifications see appendix. See accessory section for connectors and manifolds. For detail dimensions contact factory.
Item # 75023-24-41
One way roller lever operates valve only in one direction. Can be used as safety valve for limiting travel on machinery. Roller arm travel is 1/2″ (12mm). Actuating force is 4.5 Lbs.
Operating pressure range 0-145 PSI. Actuation force at 90 PSI, is approx. 4.5 Lbs.
For normally open function on 3 way valve, reverse connect ports 1-3. For 2 way operation, plug port 3.
Valve body dimensions are 2.5″ L (3 way), 3.15″ L (4 way) x 1.375″ W x .75″ H. Roller Lever extends 2″ beyond body and travel is .5″ in actuate direction and non actuate direction. Through body holes are 3/16″ diameter.
For valve specifications see appendix. For detail dimensions contact factory.
Item # 76440-00-10
Manifold Accessories: Item #: 76440-00-10 Description: Mounting Bracket Kit 5 1/2″ High (For 1/8 or 1/4 ported valves)
Item # 76026-24-31
One way roller operates valve only in one direction. Used as a pneumatic limit switch or position detector. Roller arm travel is 3/8? (10mm). Actuation force is 4.5 Lbs.
Operating pressure range 0-145 PSI. Actuation force at 90 PSI, is approx. 4.5 Lbs.
Valve body dimensions are 1.812″ L x .625″ W x 1.25″ H. Roller arm extends 1.89″ beyond body and travel is .375″ in actuate direction and .3125 in non-actuate direction. Through body mounting holes 3/16″ diameter.
For valve specifications see appendix. For detail dimensions contact factory.
There are no reviews yet.