Shopping cart is empty!
Item # 50591
Highlights:
Port mounted indicators can be mounted strategically in pneumatic systems to provide visual indications of the presence of pressure. Excellent for test or trouble shooting functions on machinery.
Indicators are machined from 5/16″ hex brass bar and have a M5 male stud for mounting in ports. A red or green indicator pops up when line pressure is present.
Item # 50599
Highlights:
Used for organizing neat runs of pneumatic tubing. Accepts 4 or 5 mm tubing. Rack holds up to 10 tubes and can be cut or snapped off for amount of positions needed. Screw holes are provided between each holder to allow for fastening.
Item # 50627
Highlights:
Brass metric sized fittings provide a full family of connectors for most applications in miniature pneumatics. Machined from solid brass stock, fittings are dependable, easy to install and reduce space requirements.
Series 50 fittings also include quick connect couplings and brass manifolds.
Item # 50670
Highlights:
The pneumatic counter can be used as an event, part or lot counter. The counter registers pneumatic impulses on a 6 digit display. Totalizer operates with impulse pressure between 30 and 115 psi. The counter can be reset either manually via a reset button, or by a pneumatic signal to a specially provided port.
Item # 50680
Highlights:
Counter is used for selecting the number of desired operations on a production run. The number of operations is set on the lower scale by holding down a white button and setting the count to be reached. The upper scale is a 5 digit totalizer. When the count reaches the lower scale setting, a built-in 3 way valve is switched to provide a pneumatic output to stop machine or signal that the count has been reached. Valve remains switched until counter is reset.
The counter operates with an impulse pressure between 30-115 PSI and can be reset either manually via a reset button or by a pneumatic signal to a specially provided port.
Item # 50704
Highlights:
Brass metric sized fittings provide a full family of connectors for most applications in miniature pneumatics. Machined from solid brass stock, fittings are dependable, easy to install and reduce space requirements.
Series 50 fittings also include quick connect couplings and brass manifolds.
Max. Tightening torque 1.5 lbs. Self sealing thread. Temperature range -10? C to + 40? C.
Item # 50780-00-10-00
Highlights:
The Series 48 miniature regulator has characteristics similar to the Series 50 miniature regulator. The unit, however, is specially designed for systems where constant adjustment of pressure is not necessary.
The Series 48 regulator is designed for mounting in panel interiors. Two (10-32) tapped holes are provided in the side of the housing for attachment to panel or mounting brackets. Ports (2) are 180? apart on the sides of the unit housing.
A variety of regulation ranges is available to suit most applications. Special designs are available.
Item # 50780-00-10-10
Highlights:
The miniature Series 50 regulator provides regulation of air pressures from 0 to 115 PSI. The regulator is available in both relieving and non-relieving versions. Housing is nickel-plated brass.
The regulator is supplied with a panel nut for mounting in a 1 inch diameter hole. A large brass knob provides for adjustment throughout the regulator’s range. A setting lock nut is included to prevent tampering after adjustment. The regulator has a third port for connection of a pressure gauge. Primary and secondary ports are 180? apart on the side of the regulator body.
Several adjustment ranges are available for close regulation in most applications. Special designs are available.
Item # 50780-00-25-00
Highlights:
The miniature Series 50 regulator provides regulation of air pressures from 0 to 115 PSI. The regulator is available in both relieving and non-relieving versions. Housing is nickel-plated brass.
The regulator is supplied with a panel nut for mounting in a 1 inch diameter hole. A large brass knob provides for adjustment throughout the regulator’s range. A setting lock nut is included to prevent tampering after adjustment. The regulator has a third port for connection of a pressure gauge. Primary and secondary ports are 180? apart on the side of the regulator body.
Several adjustment ranges are available for close regulation in most applications. Special designs are available.
Item # 50780-00-25-10
Highlights:
The miniature Series 50 regulator provides regulation of air pressures from 0 to 115 PSI. The regulator is available in both relieving and non-relieving versions. Housing is nickel-plated brass.
The regulator is supplied with a panel nut for mounting in a 1 inch diameter hole. A large brass knob provides for adjustment throughout the regulator’s range. A setting lock nut is included to prevent tampering after adjustment. The regulator has a third port for connection of a pressure gauge. Primary and secondary ports are 180? apart on the side of the regulator body.
Several adjustment ranges are available for close regulation in most applications. Special designs are available.
Item # 50780-00-80-00
Highlights:
The miniature Series 50 regulator provides regulation of air pressures from 0 to 115 PSI. The regulator is available in both relieving and non-relieving versions. Housing is nickel-plated brass.
The regulator is supplied with a panel nut for mounting in a 1 inch diameter hole. A large brass knob provides for adjustment throughout the regulator’s range. A setting lock nut is included to prevent tampering after adjustment. The regulator has a third port for connection of a pressure gauge. Primary and secondary ports are 180? apart on the side of the regulator body.
Several adjustment ranges are available for close regulation in most applications. Special designs are available.
Item # 50780-00-80-10
Highlights:
The miniature Series 50 regulator provides regulation of air pressures from 0 to 115 PSI. The regulator is available in both relieving and non-relieving versions. Housing is nickel-plated brass.
The regulator is supplied with a panel nut for mounting in a 1 inch diameter hole. A large brass knob provides for adjustment throughout the regulator’s range. A setting lock nut is included to prevent tampering after adjustment. The regulator has a third port for connection of a pressure gauge. Primary and secondary ports are 180? apart on the side of the regulator body.
Several adjustment ranges are available for close regulation in most applications. Special designs are available.